UPVC Replacement Door Handles
As time passes the handles on your doors will wear down and will require replacement. It is crucial to keep the same dimensions as the old handles when replacing them.
The three measurements you need to examine are the top screw position as well as the key hole and lever dimensions. Use the size guide to aid you.
Inline Lever/Lever
A lever/lever door handle is a contemporary handle that can be used on replacement or new doors. This kind of door handle is available in a variety of designs and finishes. This handle is offered by a number of manufacturers including Avocet ERA Fullex Hoppe Mila Millenco Yale.
Fab and Fix Windsor Inline Sprung Lever Door Handle
The uPVC/Composite door handles are made of robust materials and are ideal for multi point lock doors which require a robust design. The handles are inline and run with the same spindle as well as screw fixings. They can be easily fitted to doors made of uPVC/Composite, either new or old.
The handle can be placed and angled to accommodate all users. www.repairmywindowsanddoors.co.uk has been endurance-tested to 200 000 cycles. This ensures that the quality of finish and performance over time. The lever that is sprung can be shortened to fit more locks. This is particularly useful for narrower doors where the cylinder is situated further back in the door. A shorter lever can be used for doors with latches which can be operated with the thumb located on the inside.
Lever Pad
A Lever Pad door handle made of upvc operates differently than lever handles found on most doors. These handles can operate from a single spindle (inline) or independently from each side using two offset or inline spindles (pad). They are commonly utilized on UPVC doors with double glazing. They are available in a range of finishes and variations.
The handles are available in various finishes, including White, Chrome, and Gold. The finish is BS EN 1670 Grade 5 and resistant to corrosion. This provides the handle with an outstanding performance and durability to serve its intended purpose.
All of the UPVC lever pad styles for handles are supplied with the spindle and screws that allow them to be fitted on any new or existing uPVC door. The backplate fixation centres of 211mm permit a larger handle, which is typically an advantage when replacing an old or damaged multi-point door lock mechanism. These handle levers are also spring-loaded, which solves the issue of door handles sagging out of their horizontal position when not in use.
It is crucial to match up the PZ dimensions of both the multipoint lock and the uPVC doors when selecting the replacement UPVC spindle and handle. This measurement is often called the 'handle centre' or 'cylinder centres which is a crucial aspect of matching up the right handles.
Once you have the correct PZ size you will then need to ensure that the lever pads and push pads are in a suitable shape to fit the American with Disabilities Act (ADA) compatible handles you require for your doors. These are typically round or square with an internal lever and an external push pad.
Most of the UPVC lever pads we sell are sprung, meaning that they return to their horizontal position after not in use, rather than hanging out and possibly securing in the frame. This prevents draughts from entering the building. It is also the case that the majority of the UPVC handle lever pad style handles are hand-operated, allowing you to install them on either side of the door.
Euro Cylinder
Cylinder locks are typically used on uPVC doors, but can be utilized on other types of door. They work with a key to unlock a cylinder case which then reveals pins which can be aligned to those inside the lock body, allow them to rotate the cam, thereby opening the door. Euro Cylinders are available with up to six pins. External and internal doors require different levels of security.
The choice of cylinder you choose is vital. It depends on the amount of use your doors and handles receive. For instance, exterior doors should be fitted with a higher security cylinder, while internal doors can be secured with an ordinary cylinder. In addition, some cylinders are available with extra features which can enhance security, for instance anti-drill or anti-bump properties.
To ensure that the euro cylinder is of the right size for your door, it should be measured accurately. The cylinder should be measured from the central fixing screw hole to each end of the cylinder, including the thumb turn if you have one. It is recommended to do this while the lock is in place however, if this is not possible, you may remove it to measure. A cylinder that is protruding beyond the handle and escutcheon might be vulnerable to attacks such as snapping locks, so it is crucial that it is not too long.
The majority of modern cylinders have been made with anti-drill and bump resistance features included in their design. They are designed to decrease attacks by forcing cylinders to turn in a new direction. This helps deflect the attack and keep your doors safe.
Certain cylinders are made to resist snapping. This is a common attack on cylinders. A special tool is used to break the break line of the lock, and then the front of cylinder is snapped off. This is a faster and easier way to gain access than through the use of a multipoint locking system. It also leaves less evidence of the burglary which could hinder insurance claims.
Spring Cassette
This spring cassette is found within the base plate of your door handle. It is a spring-loaded solution to help return your multipoint lock handles to their original position after use. These handles used to have no spring and would droop when the locking mechanism was disconnected. This simple feature is among the best methods to correct this, and is a great way to prevent your doors made of upvc from getting stuck in the open or closed position, as they aren't always easy to close manually.
These spring cassettes were created to be used with a sprung multipoint lock. They won't work with unsprung handles and you'll have to cut a hole into your backplate in order for them to fit. (Please look at the image for a detailed diagram). These cassettes are a replacement to broken or missing cassettes in the backplate of uPVC door handles. They are supplied in a single unit. They feature a square cut out that is able to accommodate an 8mm shaft.
These spring cassettes provide an excellent value solution for the problem of door handles that have become sagging. These spring cassettes are simple to install and will extend the lifespan of your uPVC door. For more information about our wide range of uPVC accessories and spares, contact us today. in touch with our team. We are available to help and happy to provide expert advice.